BMR Suspension
Showing 631–648 of 1486 resultsSorted by latest
-
SuspensionBMR 82-02 F-Body Rear Hollow 29mm Adjustable Sway Bar Kit – Red
Fits 1982-2002 GM F-body;Designed for street performance, autocross, and road race applications;Adjustability allows for fine-tuning of suspension;Dramatically reduces body roll;290%-394% increase in sway bar rate over stock sway bar;Cold formed to better resist torsional fatigue;Manufactured from 29mm heavy-wall DOM tubing for increased strength;88-durometer, greasable polyurethane bushings;1/4″ Formed sway bar saddles;Durable powdercoat finish;1-2-hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
(0 reviews) -
SuspensionBMR 82-02 F-Body Rear Hollow 29mm Adjustable Sway Bar Kit – Black Hammertone
Fits 1982-2002 GM F-body;Designed for street performance, autocross, and road race applications;Adjustability allows for fine-tuning of suspension;Dramatically reduces body roll;290%-394% increase in sway bar rate over stock sway bar;Cold formed to better resist torsional fatigue;Manufactured from 29mm heavy-wall DOM tubing for increased strength;88-durometer, greasable polyurethane bushings;1/4″ Formed sway bar saddles;Durable powdercoat finish;1-2-hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
(0 reviews) -
Lowering SpringsBMR 08-09 Pontiac G8 1.0in Drop Rear Lowering Springs – Red
Lowers the rear of your V-8-equipped Pontiac G8 1-inch;Improves handling and ride quality;460 lb/in spring rate;Manufactured from chrome silicon high-tensile spring wire;Cold wound on a CNC Coiling Machine to exact specifications;Lifetime warranty against spring sag;Stress-relieved at 750 degrees F;Shot-peened;Computer tested for accurate height and spring rate;Fits V8 Models Only;Made in the U.S.A.
(0 reviews) -
Lowering SpringsBMR 08-09 Pontiac G8 1.0in Drop Front Lowering Springs – Red
Lowers the front of your V-8-equipped Pontiac G8 1-inch;Improves handling and ride quality;220 lb/in spring rate;Manufactured from chrome silicon high-tensile spring wire;Cold wound on a CNC Coiling Machine to exact specifications;Lifetime warranty against spring sag;Stress-relieved at 750 degrees F;Shot-peened;Computer tested for accurate height and spring rate;Fits V8 Models Only;Made in the U.S.A.
(0 reviews) -
Lowering SpringsBMR 08-09 Pontiac G8 1.0in Drop Lowering Springs (Set of 4)
Lowers your V-8-equipped Pontiac G8 1-inch;Improves handling and ride quality;220 lb/in front, 460 lb/in rear spring rate;Manufactured from chrome silicon high-tensile spring wire;Cold wound on a CNC Coiling Machine to exact specifications;Lifetime warranty against spring sag;Stress-relieved at 750 degrees F;Shot-peened;Computer tested for accurate height and spring rate;Fits V8 Models Only;Made in the U.S.A.
(0 reviews) -
Coilover ComponentsBMR 64-72 GM A-Body Coilover Conversion Kit Rear Adjust Shock Mt w/o CAB – Red
Fits 1964-1972 GM A-Body;Allows for use of commonly available coil-overs;CNC-laser cut ?-inch steel plate;Bolts into the stock shock mounts;Provides five coil-over shock mounting positions for rear suspension geometry changes;Requires no cutting and welding;Available in black hammertone and red powdercoat;Durable powdercoat finish;Proudly designed in the U.S.A.;Proudly built in the U.S.A.
(0 reviews) -
Coilover ComponentsBMR 64-72 GM A-Body Coilover Conversion Kit Rear Adjust Shock Mt w/o CAB – Black Hammertone
Fits 1964-1972 GM A-Body;Allows for use of commonly available coil-overs;CNC-laser cut -inch steel plate;Bolts into the stock shock mounts;Provides five coil-over shock mounting positions for rear suspension geometry changes;Requires no cutting and welding;Available in black hammertone and red powdercoat;Durable powdercoat finish;Proudly designed in the U.S.A.;Proudly built in the U.S.A.
(0 reviews) -
Exterior StylingBMR 15-22 Ford Mustang S550 AC Delete Panel
Fits 2015-2023 S550 Mustangs;Fits 2024-Current S650 Mustangs;CNC-laser cut 0.125-inch aluminum;Precise fit to factory A/C opening;Aluminum for long lasting good looks;1 hour installation time;Proudly designed in the USA!;Proudly made in the USA!
(0 reviews) -
Control ArmsBMR 78-87 GM G-Body Non-Adjustable Upper A-Arms Delrin 0.5in Tall Ball Joint – Red
Fits 1978-1987 GM G-Body;Delrin bushings eliminate upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Dual-offset cross-shafts;Requires less shim stack for negative camber than OE arms;Internally fluted, Delrin bushings;Two additional degrees of positive caster built into A-arms;Additional header clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
(0 reviews) -
Control ArmsBMR 78-87 GM G-Body Non-Adjustable Upper A-Arms Delrin 0.5in Tall Ball Joint – Black Hammertone
Fits 1978-1987 GM G-Body;Delrin bushings eliminate upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Dual-offset cross-shafts;Requires less shim stack for negative camber than OE arms;Internally fluted, Delrin bushings;Two additional degrees of positive caster built into A-arms;Additional header clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
(0 reviews) -
Control ArmsBMR 78-87 GM G-Body Non-Adjustable Upper A-Arms Delrin Std Ball Joint – Red
Fits 1978-1987 GM G-Body;Delrin bushings eliminate upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Dual-offset cross-shafts;Requires less shim stack for negative camber than OE arms;Internally fluted, Delrin bushings;Two additional degrees of positive caster built into A-arms;Additional header clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
(0 reviews) -
Control ArmsBMR 78-87 GM G-Body Non-Adjustable Upper A-Arms Delrin Std Ball Joint – Black Hammertone
Fits 1978-1987 GM G-Body;Delrin bushings eliminate upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Dual-offset cross-shafts;Requires less shim stack for negative camber than OE arms;Internally fluted, Delrin bushings;Two additional degrees of positive caster built into A-arms;Additional header clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
(0 reviews) -
Control ArmsBMR 82-92 GM F-Body A-Arms Lower DOM Non-Adj Delrin Bushings Coilover – Red
Fits 1982-1992 GM F-Body;Specifically engineered for coilover equipped cars;Eliminates lower A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Fixture welded for precise fit;Internally fluted, Delrin bushings;Pre-assembled with new heavy-duty ball joints and polyurethane bumpstops;Durable powdercoat finish;Proudly made in the U.S.A.
(0 reviews)
