BMR Suspension
Showing 595–612 of 1486 resultsSorted by latest
-
SuspensionBMR 79-04 Ford Mustang 1.25in Rear Weld-on Anti-roll Bar Kit – Hollow – Black
Launch harder and reduce body roll on your 1979-2004 Mustang with an Anti-Roll Bar Kit from BMR Suspension! Hard launches from high horsepower cars at the drag strip require more than just a normal street-style sway bar. BMRs Weld-On Anti-Roll Bar Kit (ARB730) is built to transfer as much power as possible to the rear wheels and is designed for street performance and drag racing applications. When performance is a must, rely on BMR Suspension!
(0 reviews) -
Shock Mounts & Camber PlatesBMR 16-24 Chevrolet Camaro Caster Camber Plates (Coil-Over Only) – Black Hammertone
Fits 2016-2023 Camaro;Specifically designed for coilover applications;Adds caster and camber adjustability;100% Bolt-on;No fabrication needed;Installs with simple hand tools;Manufactured from CNC, laser-cut steel plate;2.5-degrees of total camber adjustability;Teflon-lined spherical bearings;Uses factory bolt holes;Works with coilovers;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;Available in black hammertone and red powdercoat;2 hour installation time;Proudly designed in the U.S.A.;Proudly built in the U.S.A.
(0 reviews) -
Bushing KitsBMR 04-05 CTS-V Anti-Wheel Hop Bushings Kit – Black Anodized
Fits 2004-2005 Cadillac CTS-V;100% bolt-on design;No fabrication needed;Installs with simple hand tools;CNC-laser cut bushing lockout rings;Billet aluminum bushing lockouts;Greatly reduces stock subframe bushing deflection and wheel-hop;Uses factory bolt-holes and hardware;Durable powdercoat finish;Proudly designed in the U.S.A;Proudly built in the U.S.A.
(0 reviews) -
Bushing KitsBMR Suspension 2015+ Ford Mustang Vertical Link Bushing Kit
Fits 2020-2022 S550 GT500 Mustangs and 2024 Performance pack and Dark horse Mustangs;CNC-machined Delrin bushings;Eliminates bushing deflection;Eliminates wheel alignment changes due to vertical link flex;Designed for street performance, drag race, and road race applications;1-hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
(0 reviews) -
Chassis BracingBMR Suspension 64-72 GM A-Body Front Reinforcement Brace – Black Hammertone
Increase steering stability and reduce chassis deflection on your 1968-1972 A-Body with a Front Chassis Brace from BMR Suspension! The front frame and suspension of your A-Body can flex under hard braking and lateral loading. BMRs Front Chassis Brace (CB410) stiffens the chassis of your A-Body and is designed for street performance, drag racing, and handling applications. When performance is a must, rely on BMR Suspension!
(0 reviews) -
-
-
Shock Mounts & Camber PlatesBMR 11-14 Ford Mustang / Shelby GT500 Caster Camber Plates – Red
Fits 2005-2010 S197 Mustangs;Fits 2007-2010 Shelby GT500s;Manufactured from CNC laser-cut steel plate;Teflon-lined spherical bearings;Replaces factory upper strut mounts;Compatible with stock and OE struts;100% bolt-on design;Adds aggressive alignment settings for racing applications;Provides a total camber range of 1.75 degrees;Available in red and black hammertone powder coat for long lasting good looks;1-2 hour installation time;Proudly designed in the USA!;Proudly made in the USA!
(0 reviews) -
Lowering SpringsBMR 02-09 Chevrolet Trailblazer / GMC Envoy 3.0in Drop Front Lowering Springs – Red
Lowers your V-8-equipped 2002-2009 Trailblazer 3-inches in the rear;Improves handling and ride quality;215 lb/in rear spring rate;Manufactured from chrome silicon high-tensile spring wire;Cold wound on a CNC Coiling Machine to exact specifications;Lifetime warranty against spring sag;Stress-relieved at 750 degrees F;Shot-peened;Computer tested for accurate height and spring rate;Fits V8 Models Only;Made in the U.S.A.
(0 reviews) -
Lowering SpringsBMR 02-09 Chevrolet Trailblazer / GMC Envoy 2.0in Drop Front Lowering Springs – Red
These springs will lower the front of your V-8-equipped 2002-2009 Trailblazer and feature a fine-tuned spring rate to give you great handling and a smooth ride.
(0 reviews) -
Control ArmsBMR 82-02 Lower control arms DOM on-car adj poly/rod end combo Black Hammertone 3rd/4th Gen F-bod
Fits all 1982-2002 GM F-Body and 1978-1987 GM G-Body;On-car adjustable;Right/left hand threaded adjuster makes on-car adjustments simple and easy;MIG-welded 1 1/4-inch DOM steel tubing;TIG-welded chrome-moly tube adapters;Dramatically reduces control arms flex;Zinc-plated, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends. It also features 304 stainless steel, custom designed rod end spacers;95-durometer internally fluted polyurethane greasable bushings;Zinc coated bushing sleeves;Greatly reduces bushing deflection;Improved Performance with OEM-like NVH levels;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
(0 reviews) -
Shock Mounts & Camber PlatesBMR 90-93 Fox Mustang Caster Camber Plates – Red
Fits 1990-1993 Mustangs;Manufactured from 0.1875-inch laser-cut steel plate;Teflon-lined spherical bearings;Lockout plates ensure easy adjustability and allow for quick tracking of various camber adjustments;Adds caster and camber adjustability;Provides a camber range from -3.5 degrees to +1.0 degree;Corrects alignment and adds multiple settings for both the street and track;100% bolt-on design;Installs with simple hand tools;Available in red or black hammertone powder coat for long lasting good looks;1-2 hour installation time;Proudly designed in the USA!;Proudly made in the USA!
(0 reviews)
