Traction Bars
Showing 1–18 of 27 resultsSorted by latest
-
SuspensionICON 23-24 Ford F-250/F-350 SuperDuty 4WD 4-Link Frame Bracket Kit
The ICON 4-Link system not only gives your Ford Super Duty an aggressive look, it enhances the articulation and improves handling of the truck by maintaining consistent caster angles and eliminating bushing bind in the stock radius arms.
(0 reviews) -
SuspensionICON 2022+ Toyota Tundra Billet Rear Adj Track Bar Kit
The ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2022-2025 Toyota Tundra, 2023-2025 Toyota Sequoia, 2024-2025 Toyota Tacoma, 2024 Toyota Land Cruiser 250 Series, or Lexus GX550. Threaded rod ends allow easy “on-vehicle” fine adjustment of track bar length without requiring removal or disassembly of the track bar. Simply loosen the jam nuts then rotate the bar, using the machined wrench flats, to adjust link length. This allows for easy correction of axle location and dialing in precise tracking whenever adjustments are made to ride height. The track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON’s billet upper and lower links. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.
(0 reviews) -
SuspensionICON 2007+ Toyota FJ / 2003+ Toyota 4Runner Rear Adj Track Bar Kit
While highly recommended for all FJ, 4Runner and GX builds, Kinetic Dynamic Suspension System (KDSS) equipped vehicles require this adjustable rear track bar to increase clearance from the KDSS components as the suspension approaches full extension.
(0 reviews) -
SuspensionICON 07-18 Jeep Wrangler JK Rear Adj Track Bar Kit
The ICON Adjustable Rear Track Bar for the 2007-2018 JK will work on any Jeep JK with 2.5 – 4.5″ of lift. Upgrading your Jeep JK track bar is great for centering the rear axle allowing it to track perfectly under the vehicle vs. offset to the side. The ICON Adjustable Track Bar contains a dual stage Polyurethane / Delrin Bushing kit on one end that has minimal deflection and a rod end with our pinch bolt housing that allows on Jeep adjustability.
(0 reviews) -
Sale!
SuspensionICON 05-24 Ford Super Duty Track Bar Ball Joint Service Kit
The ICON Ford Super Duty Track Bar Ball Joint Kit ensures a rigid joint for improved handling and elimination of wobble and their greaseable design provides a long service life. Installs into either OE axles or ICON track bars.
(0 reviews) -
-
SuspensionICON 21+ Ford Bronco Tubular Rear Track Bar Kit – Adjustable
The ICON Tubular Rear Track Bar helps center the axle of your lifted 2021-Up Ford Bronco to allow for increased suspension travel and articulation. A massive FK Rod End at one end, along with a dual-durometer, high angle greaseless bushing at the other end yields the best combination of maximum travel and articulation while isolating and damping road noise and vibrations. ICON’s exclusive rod end Double Adjuster Sleeve allows for fast, easy “on-vehicle” adjustment of track bar length without requiring removal or disassembly of the track bar. This allows for easy correction of axle location and dialing in precise tracking whenever adjustments are made to ride height. The track bar is made of CNC bent 1¼ x .250 wall 1026 DOM tubing with CNC machined threaded end and bushing housing. It has a multi-stage black powder coat finish. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.
(0 reviews) -
SuspensionICON 2020+Jeep JT Rear Adj Track Bar Kit
Upgrading your Jeep Gladiator’s rear track bar is a great solution ensure that the Jeep’s axle is properly centered under the vehicle in addition to providing other useful benefits. ICON’s Double Adjuster allows for on vehicle adjustment to streamline the rear-end alignment after installation. A maintenance free, multi-durometer bushing paired with a 3/4” rod end bearing virtually eliminate the deflection that is common in the stock track bar bushings for improved vehicle handling. Overall articulation is also improved by allowing the suspension to cycle fully without binding.
(0 reviews) -
SuspensionICON 2017+ Ford F-250/F-350 Adj Track Bar Kit
This ICON adjustable track bar will allow the proper alignment of your lifted truck’s steering geometry, delivering increased strength, control, and proper axle positioning while reducing stress on related steering components.
(0 reviews) -
SuspensionICON 2020+ Jeep Gladiator 2.5in Stage 7 Suspension System (Billet)
The Stage 7 ICON 2.5 Suspension System for the Jeep Gladiator is the ideal setup for drastically improving off-road performance and overall ride quality for the application that will see frequent heavy off-road use. This complete suspension system features ICONs proven 2.5 Series shocks, 2.5 lift dual-rate front coil springs, tubular steel fixed lower and adjustable upper front links, billet front sway bar links, a triple-rate rear coil spring kit, billet aluminum adjustable upper and lower rear links, a rear sway bar relocation kit, front and rear adjustable track bars, and all necessary hardware for install. This system provides an increase of over 30% front and 20% rear wheel travel and was designed around the use of a 35 tire. For those looking to run a 37 tire this can be achieved with the ICON Jeep JT Bump Stop Spacer Kit (Part #22071).
(0 reviews) -
SuspensionICON 2017+ Ford F-250/F-350 7in Stage 4 Suspension System
The Stage 4 system sees the inclusion of the ICON Vehicle Dynamics Ford Super Duty 4-Link kit, which further improves performance by eliminating suspension bind commonly experienced with factory radius arms during articulation. This freeing up of the front end and the ability of the 4-Link Kit to maintain positive caster through the range of travel equates to an unparalleled ride quality in all conditions. With the endless hours ICON has spent testing and tuning our suspension components and shocks as a complete package, you can rest assured knowing that you have the best suspension solution on the market.
(0 reviews) -
SuspensionICON 2021+ Ford Bronco Billet Rear Lower Link Kit
ICON’s billet aluminum rear lower link arms for the 2021-UP Ford Bronco are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units. This rear lower link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. ICON’s engineering team has also gone a step further in the development of these products by incorporating features such replaceable nylon rock sliders to prevent any hang-ups on the trail. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.
(0 reviews) -
SuspensionICON 2014+ Ram 2500 Front Adjustable Track Bar Kit
The ICON Vehicle Dynamics 2014-UP Ram 2500 4WD Adjustable Front Track Bar helps eliminate the notorious “Death Wobble” these trucks have when you begin to adjust the ride height. The Upgraded ICON Ram 2500 adjustable track bar is great for centering the front axle allowing it to track perfectly under the truck vs. offset to the side. This bar is constructed of 1/4″ Wall 1 1/2″ DOM Tubing and is CNC Bent for a precise OE style fit. The weak OEM rubber bushing is eliminated and our 1″ captured uniball bearing on the driver side minimizes overall deflection while allowing just enough movement so steering wheel feedback is not present. We use a PTFE lined rod end on the passenger side which also reduces deflection and threads into our left/right adjuster that allows easy on truck adjustability for the perfect front end alignment.
(0 reviews) -
SuspensionICON 05-16 Ford F-250/F-350 Adj Track Bar w/FK Rod End
ICON’s adjustable track bar installs using factory hardware and can be adjusted on the truck. Bar comes complete with FK rod end bearings and machined rod end spacers to eliminate the deflection of the stock bushing setup.
(0 reviews) -
SuspensionICON 99-04 Ford F-250/F-350 Adj Track Bar Kit
ICON’s adjustable track bar installs using factory hardware and can be adjusted on the truck. Bar comes complete with FK rod end bearings and machined rod end spacers to eliminate the deflection of the stock bushing setup.
(0 reviews) -
SuspensionICON 2018+ Jeep Wrangler JL Rear Adj Track Bar Kit
Optimize your rig’s handling and rear axle alignment to avoid premature tire wear and unwanted handling characteristics, especially on lifted vehicles. Bar installs easily and can be adjusted on the vehicle to properly center the rear axle.
(0 reviews) -
SuspensionICON 2018+ Jeep Wrangler JL / 2020+ Jeep Gladiator JT Front Adj Track Bar Kit
This ICON adjustable track bar will allow the proper alignment of your lifted truck’s steering geometry, delivering increased strength, control, and proper axle positioning while reducing stress on related steering components.
(0 reviews) -
SuspensionICON 2014+ Ram 2500 Rear Adjustable Track Bar Kit
Utilizes a large PTFE lined rod ends on both the driver and passenger side
(0 reviews)