These replacement temperature sensors are designed specifically for use with AutoMeter short sweep electric air core gauges and are suitable for cylinder head monitoring and for replacing AutoMeter sensor #2258 where clearance and depth issues would otherwise prevent typical installation.
| Weight | 0.06 lbs |
|---|---|
| Dimensions | 29.1 × 7.2 × 5.5 in |
AEM Digital Oil Pressure Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays oil pressure in 1 PSI increments, and a sweeping LED “needle” that lines the edge and moves as oil pressure changes from 0 to 150. The oil pressure gauge’s digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.
The OBDII output simulates an auxiliary ECU signal when plugged into a vehicle’s OBD port, which requires a unique address from the other ECUs already on a vehicle’s network. AEM’s default OBDII CAN address will work with most popular vehicles and adjustments should not be necessary. However, AEM has provided OBDII address programmability through the buttons on the gauge face if a different address other than the default address is required, allowing users to program ECU #, Parameter Identification (PID), Message Identifier, and Bit Rate.
There are many different tools that can be used for measurement, but the degree of accuracy is dependent upon the tool. For example, a ruler can measure distance with a good degree of accuracy, but for a more precise measurement a caliper should be used. The difference between a brass pressure sensor and a stainless steel pressure sensor is similar if we think about it in these terms:
2.5-inch No-Weld O2 Sensor Mount, Allows Users to Install O2 Sensor(s) Without Welding a Bung to Exhaust Pipe
Reviews
There are no reviews yet.