The Fuel Bridge wires in between your fuel level gauge and sending unit and allows you to use any AutoMeter fuel level gauge with any stock or aftermarket sending unit. The triple push button with LED display allows for easy set up. This unit is a compact size at 3 1/8″ wide x 2 1/2″ tall x 3/4″ thick. A low fuel level warning is available at 10% and off at 15%. It can turn on an LED or relay.
| Weight | 0.19 lbs |
|---|---|
| Dimensions | 4 × 3 × 1.7 in |
K-Type Closed Tip Thermocouple 10ft Wiring Extension Kit. Includes: 10ft Wiring Extension, 2 X 4-40 Hex Nut, 2 X 4-40 Screw & 6 in Heat Shrink Tubing
AEM Digital Oil Pressure Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays oil pressure in 1 PSI increments, and a sweeping LED “needle” that lines the edge and moves as oil pressure changes from 0 to 150. The oil pressure gauge’s digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.
Flat Panel Digital Dash Display, CD-5L logging, non-GPS racing dash, CAN input only, 5-inch diagonal screen, carbon fiber enclosure, wiring harness included, Does Not Include Buttons (See PN 30-3610)
The CD-5 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and/or 3rd-party CAN signals. We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port (see Supported Apps Tab), and the CD-5 Carbon can be added to any vehicle with the addition of our 22 Channel CAN Sensor Module. The CD-5 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go! All channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screen dashboard monitor or warning alerts.
Reviews
There are no reviews yet.