Description
1/8″ NPT Female to Male compression fitting thread designed for AutoMeter 1/8″ Nylon or Copper Tubing. Use to connect AutoMeter 1/8″ Nylon or Copper tubing to AutoMeter Mechanical gauges.
Autometer Adapter for Copper Tube and Nylon Tube
BRAND
CATEGORY
MPN
SKU
SUBCATEGORY
UPC
Additional information
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 6.5 × 3.75 × 0.5 in |
Related products
-
Sale!
GaugesAEM 7 BAR MAP or 100 PSIA Stainless Steel Sensor Kit
There are many different tools that can be used for measurement, but the degree of accuracy is dependent upon the tool. For example, a ruler can measure distance with a good degree of accuracy, but for a more precise measurement a caliper should be used. The difference between a brass pressure sensor and a stainless steel pressure sensor is similar if we think about it in these terms:
(0 reviews) -
Sale!
GaugesAEM K-Type Thermocouple Wiring Extension Kit
K-Type Closed Tip Thermocouple 10ft Wiring Extension Kit. Includes: 10ft Wiring Extension, 2 X 4-40 Hex Nut, 2 X 4-40 Screw & 6 in Heat Shrink Tubing
(0 reviews) -
Sale!
GaugesAEM CD-5 Carbon Digital Dash Display
The CD-5 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and/or 3rd-party CAN signals. We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port and the CD-5 Carbon can be added to any vehicle with the addition of our 22 Channel CAN Sensor Module. The CD-5 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go! All channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screen dashboard monitor or warning alerts.
(0 reviews) -
Sale!
GaugesAEM CD-5G Carbon Digital Dash Display w/ Interal 10Hz GPS & Antenna
The CD-5 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and/or 3rd-party CAN signals. We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port (see Supported Apps Tab), and the CD-5 Carbon can be added to any vehicle with the addition of our 22 Channel CAN Sensor Module. The CD-5 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go! All channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screen dashboard monitor or warning alerts.
(0 reviews)
Reviews
There are no reviews yet.