aFe BladeRunner 22-23 Kia Stinger L4-2.5L (t) Aluminum Hot and Cold Charge Pipe Kit – Red

Code: afe46-20694-R
aFe BladeRunner 22-23 Kia Stinger L4-2.5L (t) Aluminum Hot and Cold Charge Pipe Kit - Red

Directly replace your Kia Stinger’s restrictive charge pipes with aFe POWER’s BladeRunner free-flowing, heat-resistant aluminum charge pipes.

$599.50

1 in stock

1 in stock

BRAND
CARB
CATEGORY
MPN
SKU
SUBCATEGORY
UPC
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This kit includes high-quality, stainless-steel, smartseal clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. This charge pipe kit also features factory style billet aluminum quick-connect adapters with o-ring seals to ensure a leak-free fit while maintaining superior strength and durability. Finished in textured red powder coating with a unique laser-etched aFe POWER logo for a custom look.

Additional information

Weight 6.7 lbs
Dimensions 16.7 × 13.1 × 13.1 in

Reviews

There are no reviews yet.

Be the first to review “aFe BladeRunner 22-23 Kia Stinger L4-2.5L (t) Aluminum Hot and Cold Charge Pipe Kit – Red”

Your email address will not be published. Required fields are marked *


Related products

  • Sale! AEM V3 Water/Methanol Injection Kit - Multi Input (NO Tank)
    Forced Induction

    AEM V3 Water/Methanol Injection Kit – Multi Input (NO Tank)

    AEM’s Multi Input controller design enables users to install Water/Methanol Injection on high compression naturally aspirated vehicles (NA) via the MAF/IDC settings. The Multi-Input controller works with an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF. The Multi-Input Controller is available with a 1.15-gallon tank (PN 30-3350), a five-gallon tank (PN 30-3351), and a tank-less kit (PN30-3352).

    (0 reviews)
    Original price was: $643.45.Current price is: $571.95. Add to cart
  • Sale! AEM Water/Methanol Injection System - High-Flow Low-Current WMI Solenoid - 200PSI 1/8in-27NPT In/Out
    Forced Induction

    AEM Water/Methanol Injection System – High-Flow Low-Current WMI Solenoid – 200PSI 1/8in-27NPT In/Out

    The AEM Water/Methanol Solenoid is a 2-way, normally closed 12V valve with stainless steel body for use with AEM Water/Methanol Injection Systems. The shut-off valve provides an accurate and consistent shut off and prevents siphoning under vacuum.

    (0 reviews)
    Original price was: $164.95.Current price is: $146.25. Add to cart
  • Sale! AEM Water Methanol Reservoir Cap
    Forced Induction

    AEM Water Methanol Reservoir Cap

    · Ridged design to help prevent slipping when taking cap on and off

    (0 reviews)
    Original price was: $21.51.Current price is: $19.12. Add to cart
  • Sale! AEM V3 One Gallon Water/Methanol Injection Kit - Multi Input
    Forced Induction

    AEM V3 One Gallon Water/Methanol Injection Kit – Multi Input

    Combined with the integral and highly accurate conductive low-fluid switch in the tank, “Boost Safe” can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water/Methanol Injection Systems. Revised Flow Control Strategy for More Linear Fluid Delivery AEM’s engineers spent extensive time revamping the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water/methanol injection, which further optimizes charge air cooling and detonation control.

    (0 reviews)
    Original price was: $724.85.Current price is: $643.45. Add to cart