Lights
Showing 2791–2808 of 11302 resultsSorted by latest
-
Light MountsRigid Industries Mount for most ATVs housing a 6in LED Light
RIGID Universal ATV Mount Kit; Fits 6 Inch E-Series Or SR-Series LED Lights
(0 reviews) -
Light Accessories and WiringRigid Industries 6 Amp LED Flasher – 2 Output – 12 Volt
This RIGID 6 amp flasher module provides seven flashing options for your LED lighting components. It is easy to install and works off of the auxiliary switch to your lights. This model features the following modes: Double Alternating: Alternates flashing twice per side. Quad Alternating: Alternates flashing four times in quick succession per side. Quint Alternating: Alternates flashing five times in quick succession per side. Mega Alternating: Alternates one bright flash per side. Double Simultaneous: Both sides flash twice simultaneously in quick succession, followed by a short pause. Quad Simultaneous: Both sides flash four times simultaneously in quick succession, followed by a short pause. Random: Randomly cycles through all previous modes. This model is specifically designed to be installed into a 12V electrical system only.
(0 reviews) -
Light MountsRigid Industries Jeep JK – Double A-Pillar Mount – Mounts 2 sets of Dually/D2
RIGID 2007-2018 Jeep JK A-Pillar Mount; Fits 4 D-Series or Radiance LED Lights
(0 reviews) -
Light MountsRigid Industries Jeep JK – A-Pillar Mount Kit – Mounts set of Dually/D2
RIGID 2007-2018 Jeep JK A-Pillar Mount Kit; Fits D-Series or Radiance POD Lights
(0 reviews) -
Light Accessories and Wiring
Rigid Industries 3 Amp LED Flasher – 2 Output – 12 Volt
Center High Mount Stop Light and Off-Road Light Wiring Harness
(0 reviews) -
Light Accessories and WiringRigid Industries Harness used for set of Dually Lights
Professional Installation Recommended, RIGID Accessories, Fits D-Series Pair, SR-Q Series Pair Spot Or Flood Optics
(0 reviews) -
Light Accessories and WiringRigid Industries Harness used for 4in/ 6in/ Single Dually/ D2
This 11 foot/3.35 meter wiring harness is designed to connect a single LED light to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID LED Lights: D-Series single, 4 inch E-Series, 6 inch E-Series PRO, 6 inch SR-Series, 10 Inch SR-Series, Q-Series single, D-XL Series single, SR-M Series single, SR-Q Series single.
(0 reviews) -
Light Accessories and WiringRigid Industries Harness used for 10in-30in Light Bars
This 11 foot/3.35 meter wiring harness is designed to connect a single LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID LED Lights: 20 inch-50 inch SR-Series PRO and 10 inch-30 inch E-Series PRO Light Bars.
(0 reviews) -
Light Accessories and WiringRigid Industries 25in Harness with 3 position switch use with D/ SRM or SRQ for Back up Lights
Professional Installation Recommended, RIGID Accessories, Fits SR-M And SR-Q Series Back Up Kits
(0 reviews) -
Light Accessories and WiringRigid Industries Switch – Lighted Rocker – Waterproof IP56
This RIGID switch features a lighted rocker with protective rubber boot and is a great addition to any RIGID lighting system. This switch will fit all RIGID wiring harnesses. This product requires a 3/4 inch hole to mount.
(0 reviews) -
Light Accessories and WiringRigid Industries Hi/Po Harness used for 40in-50in Light bar
This 13 foot/4 meter wiring harness is designed to connect a single LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID LED Lights: 40 inch-50 inch E-Series PRO, 20 inch-54 inch RDS-Series PRO.
(0 reviews) -
Light MountsRigid Industries D-series L Bracket Kit w/Hardware/ Stainless Steel
RIGID Mounting Bracket for D-Series or Radiance Pod; Stainless Steel; Single
(0 reviews) -
Light MountsRigid Industries D-series L Bracket Kit w/Hardware/ Black
RIGID Mounting Bracket Kit for D-Series or Radiance Pod; Black; Single
(0 reviews) -
Light MountsRigid Industries SR-series L Bracket Kit
RIGID L Bracket Mounting Kit for SR-Series LED Light; Black; Pair
(0 reviews) -
Light MountsRigid Industries E-series L Bracket Kit
RIGIDs grilles, OE brackets and mounts are constructed of durable stainless steel that is coated with a high-quality scratch resistant and UV resistant powder coat finish to ensure years of use even in the harshest conditions. Own The Night with RIGIDs aggressively styled mounting options. This RIGID L bracket mounting kit fits E-Series, Adapt E-Series, 2×10 Scene and Radiance LED light bars.
(0 reviews) -
Light MountsRigid Industries Jeep JK – A-Pillar Mount Set of 2 – For Dually/D2 set
RIGID 2007-2018 Jeep JK A-Pillar Mount Fits D-Series; D-XL; Radiance Pod; Pod XL
(0 reviews) -
Light Accessories and WiringRigid Industries Pendant Switch Kit
Use RIGIDs Pendant Switch Kit if you dont want to drill a hole in your vehicle to mount a switch. This Kit works great for powersports applications. Ultra-durable, waterproof, dust-proof and impact resistant. LED on/off indicator light. Kit includes switch, 3M VHB mounting tape and radius mount pad for bar mounting.
(0 reviews) -
Light Covers and GuardsRigid Industries 10in SR-Series Light Cover – Yellow
RIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is very easy. They are also perfect for areas that require covers on accessory lights. This kit contains one 10 in. light cover and fits RIGIDs 20, 30, 40, or 50 in. SR-Series PRO LED light bars. Does not fit 10 in. SR-Series PRO or any legacy/obsolete SR-Series. Purchase in multiples for full coverage of your SR-Seres PRO and RDS SR-Series PRO (along with 11 in. RDS SR-Series Cover) LED light bar. Available colors are: amber, clear, smoke or black.
(0 reviews)