Forced Induction
Showing 2197–2214 of 2214 resultsSorted by latest
-
Forced Induction
AEM V2 5 Gallon Diesel Water/Methanol Injection Kit – Multi Input
Heavy-Duty Waterproof High Pressure Injection Pump – Safe for Engine Bay/Frame Rail Mounting AEM’s internally-bypassed water/methanol injection pump is waterproof and safe for mounting in loactions that are exposed the elements. It does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.
(0 reviews) -
Forced Induction
AEM V3 One Gallon Water/Methanol Injection Kit – Multi Input
Combined with the integral and highly accurate conductive low-fluid switch in the tank, “Boost Safe” can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water/Methanol Injection Systems. Revised Flow Control Strategy for More Linear Fluid Delivery AEM’s engineers spent extensive time revamping the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water/methanol injection, which further optimizes charge air cooling and detonation control.
(0 reviews) -
Forced Induction
AEM Wiring Harness for V2 Controller w/ Multi Input
Plug and Play replacement harness for our multi-input Water/Methanol controller.
(0 reviews) -
Forced Induction
AEM V2 5 Gal Tank Kit w/ Conductive Fluid Level Sensor
5 Gallon Tank that includes Conductive Fluid Level Sensor
(0 reviews) -
Forced Induction
AEM V2 HD Controller Kit – Internal MAP w/ 40psi Max
V2 Water/Methanol HD Controller Kit – Internal MAP with 40psi max
(0 reviews) -
Forced Induction
AEM V2 Multi Input Controller Kit – 0-5v/MAF Freq or V/Duty Cycle/MAP
V2 Water/Methanol Multi Input Controller Kit- 0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP
(0 reviews) -
Forced Induction
AEM V2 Standard Controller Kit – Internal MAP w/ 35psi Max
The new wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. An integrated Pump Ground circuit is included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive.
(0 reviews) -
Forced Induction
AEM V3 WATER/METHANOL HD KIT – NO RESERVOIR (Internal Map)
One is boost dependent for forced induction vehicles up to 35 PSI of boost (kit PN 30-3300). The Boost Dependent controller has an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup.
(0 reviews) -
Forced Induction
AEM V3 Water/Methanol Injection Kit – NO TANK (Internal Map)
One is boost dependent for forced induction vehicles up to 35 PSI of boost (kit PN 30-3300). The Boost Dependent controller has an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup.
(0 reviews) -
Forced Induction
AEM V2 5 Gallon Diesel Water/Methanol Injection Kit (Internal Map)
One is boost dependent for forced induction vehicles up to 35 PSI of boost (kit PN 30-3300). The Boost Dependent controller has an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup.
(0 reviews) -
Forced Induction
AEM V3 1 Gallon Water/Methanol Injection Kit (Internal Map)
The second controller (Kit PN 30-3350) features a multiple input design that enables users to install AEM’s Water/Methanol Injection Kit on both high compression naturally aspirated vehicles (NA) via the MAF/IDC settings and ultra-high boost vehicles (above 35 PSI) using an external MAP sensor. The Multi Input controller works with an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF.
(0 reviews) -
Forced Induction
AEM Water/Methanol Injection 200psi Recirculation Pump
Water/Methanol Injection 200psi Recirculation Pump w/ 3/8 in NPT Fittings
(0 reviews) -
Forced Induction
AEM V3 Water/Methanol Injection Nozzle Only Kit (Qty 2)
Includes Interchangeable Swirl Generators for 250cc, 500cc, & 1000cc of flow for each injector
(0 reviews) -
Forced Induction
AEM Water/Methanol Injection Nylon Hose
20′ Water/Methanol Injection Nylon Hose 1/4″-Black
(0 reviews) -
Forced Induction
AEM V3 Water Extra Nozzle Kit
AEM’s V3 WMI Injector features an innovative design that increases atomization for faster cooling using unique Swirl Generator technology, which also controls flow through a fixed injector orifice.
(0 reviews) -
Forced Induction
AEM Water/Methanol Injection System – High-Flow Low-Current WMI Solenoid – 200PSI 1/8in-27NPT In/Out
The AEM Water/Methanol Solenoid is a 2-way, normally closed 12V valve with stainless steel body for use with AEM Water/Methanol Injection Systems. The shut-off valve provides an accurate and consistent shut off and prevents siphoning under vacuum.
(0 reviews) -
Forced Induction
AEM Water / Methanol Injection 6-Amp Recirculation-Style Pump 200psi for One-Gallon Kit **replacemen
AEM offers performance automotive accessories to upgrade your existing water/methanol injection (WMI) system including inline water/methanol fluid filters, WMI flow gauges, the Water/Methanol Failsafe Device gauge, and water/methanol system nozzle and jet kits.
(0 reviews) -
Forced Induction
AEM Water / Methanol Inline Injection Filter
AEM’s Methanol/Water Injection Filter can filter particulates as small as 40 microns. It protects the working parts of the water/methanol system and the engine from particulates in the water/methanol mixture when installed in-line before the water/methanol pump, and can be used on virtually any water/methanol injection system using 1/4″ OD tubing.
(0 reviews)

















