Magnaflow
Showing 1189–1206 of 7853 resultsSorted by latest
-
Catback
Magnaflow 15-20 Ford F-150 Street Series Cat-Back Performance Exhaust System
The MagnaFlow 2015-2020 Ford F-150 Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.7L, 3.5L, 5.0L 2015-2020 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Before Passenger Rear Tire exit with 3.5in. Black Coated Clamp-On Double Wall Angle Cut Cut Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150’s to shame. With this system your vehicle will be producing Very Aggressive exterior and Aggressive interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19497 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19497 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
(0 reviews) -
Catalytic Converter Direct Fit
MagnaFlow 15-20 Honda Fit L4 1.5L OEM Grade Manifold Catalytic Converter Direct Fit
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22-048. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2015-2020 Honda Fit and interchanges with OE part 18190-5R7-A00. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
(0 reviews) -
Catalytic Converter Universal
MagnaFlow 99-03 Honda Odyssey V6 3.5L California Grade CARB Compliant Universal Catalytic Converter
Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
(0 reviews) -
Catalytic Converter Direct Fit
MagnaFlow Conv Direct Fit 05-09 Toyota 4Runner 4.0L
Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
(0 reviews) -
Catback
Magnaflow 22+ Toyota Tundra Overland Series 3in Single Straight Passenger Side Rear Cat-Back Exhaust
The MagnaFlow Toyota Tundra Overland Series performance exhaust system #19604 is built to withstand anything that Mother Nature throws at it thanks to the elevated ground clearance and superior departure angles it offers compared to your truck’s existing exhaust system. #19604 makes this all possible thanks to its single tipless, high tuck tailpipe that exits the rear driver’s side. The system’s cat-back design replaces all of your truck’s stock exhaust components from near the catalytic converter on back. Our innovative NDT (No Drone Technology) resonators are engineered to keep droning noises in check using quarter-wave passive noise cancellation, improving your situational awareness while out on the trail and facilitating a more comfortable ride when cruising the highway. Exhaust kit #19604 is compatible with all 2022-2023 Toyota Tundra crew cab and extended cab/standard bed configurations equipped with the 3.5L V6 engine option. #19604 features 3″ diameter, mandrel bent main tubing that flows through a fast-flowing, straight through 5″x11″x22″ offset/offset same-side muffler with internal branch pipe, all with a premium brushed finish. This Toyota Tundra performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced, CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.
(0 reviews) -
Catalytic Converter Direct Fit
MagnaFlow Conv Direct Fit OEM 15-17 Mustang V6 3.7 Underbody
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
(0 reviews) -
Catalytic Converter Universal
MagnaFlow Conv Univ 2in
Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
(0 reviews) -
Catalytic Converter Direct Fit
MagnaFlow California Converter Direct Fit 08-10 Lexus IS F 5.0L (Left)
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5531868. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2008-2014 Lexus IS F and interchanges with OE part 17105-38060. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
(0 reviews) -
Catalytic Converter Direct Fit
MagnaFlow Conv DF 2008 – 2010 Lexus IS F 5.0L
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5531881. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2008-2014 Lexus IS F and interchanges with OE part 17104-38060. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
(0 reviews) -
Catalytic Converter Direct Fit
Magnaflow OEM Grade Direct Fit Converter 15-16 Honda CR-V 2.4L
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-293. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2015-2016 Honda CR-V and interchanges with OE part 18150-5LA-A00. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
(0 reviews) -
Catalytic Converter Direct Fit
MagnaFlow Converter Direct Fit 05-11 Toyota Tacoma 4.0L
Torca AccuSeal® Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
(0 reviews) -
Catback
MagnaFlow Cat-Back 2021 Jeep Wrangler 6.4L Rock Crawler Series Dual Exit Stainless Exhaust
The MagnaFlow Jeep Wrangler Rubicon 392 Rock Crawler Series Cat-Back Exhaust System #19582 is tuned to upgrade your rig with MagnaFlow’s deep exhaust note and dyno-proven performance gains. Exhaust kit #19582 is designed to make your 2021-2023 Jeep Wrangler Rubicon 392’s 6.4L HEMI V8 produce an even more aggressive exterior sound while keeping things to a moderate level within the vehicle’s interior. This, combined with the use of a MagnaFlow NDT (No Drone Technology) Resonator to eliminate droning noises at cruising speeds, improves comfort on long drives. The mandrel bent 3″ main piping and straight-through muffler bodies of this Jeep Wrangler Rubicon 392 exhaust system are secured using the included racing-bred v-band clamps, with exhaust gases vacating through a dual high-clearance exit that offers improved departure angles for those times when you decide to leave the road behind and test your SUV’s capabilities. Corrosion resistant stainless-steel construction and CNC precision manufacturing ensure superior durability and reliable performance. #19582 is backed by MagnaFlow’s limited lifetime warranty.
(0 reviews) -
Catalytic Converter Direct Fit
MagnaFlow Conv DF 2004-2008 Ford Crown Victoria 4.6L
Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
(0 reviews) -
Catalytic Converter Universal
MagnaFlow Conv Univ 2.25inch C/C PC1
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 3322305 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
(0 reviews) -
Catback
MagnaFlow 2021 Ford Bronco Overland Series Cat-Back Exhaust w/ Single Straight Driver Exit- No Tip
The MagnaFlow Ford Bronco Overland Series Cat-Back Performance Exhaust system #19559 is the perfect solution to further improve the off-road utility of your already-capable 2021-2023 Ford Bronco equipped with the 2.7L twin-turbo V6. This cat-back, direct-fit exhaust kit is designed to install easily and fit perfectly thanks to the hard work of the engineers at MagnaFlow’s Tech Center, who made detailed 3D scans of the entire vehicle in order to ensure perfect fitment. The advantage of such precise tolerances is that the entire performance exhaust system is mounted closer to the undercarriage of the vehicle than the stock system, resulting in significantly improved ground clearance. #19559 also features 3″ main piping that leads to a straight-through muffler before terminating in a single 2.5″ high-clearance side exit, which further improves the rear departure angle versus the standard tailpipe. The result of this upgrade is improved rock crawling capability and the ability to get out of tricky situations on the trail more easily. This Ford Bronco exhaust system utilizes a tunable NDT (No Drone Technology) quarter-wave resonator to eliminate unwanted noises at cruising speeds en route to your destination, with the added benefit of improving situational awareness when you’re out exploring or camping in the middle of nowhere. Exhaust kit #19559 is engineered to produce MagnaFlow’s deep signature exhaust tone at mild interior and moderate exterior sound levels, ideal for enjoying the character of your engine without scaring Mother Nature away. The exhaust system is built to last thanks to the use of precision CNC robotic manufacturing techniques and durable stainless-steel construction, all backed by MagnaFlow’s limited lifetime warranty.
(0 reviews) -
Catalytic Converter Direct Fit
MagnaFlow 11-14 Ford F-150 5.0L Direct Fit CARB Compliant Left Catalytic Converter
Torca AccuSeal® Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
(0 reviews) -
Catalytic Converter Universal
Magnaflow Converter Universal CARB Compliant 2.25in Inlet 2.25in Outlet 16in Length
Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
(0 reviews) -
Catalytic Converter Direct Fit
MagnaFlow 10-11 Jeep Wrangler 3.8L Direct Fit CARB Compliant Catalytic Converter
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5551458. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2011 Jeep Wrangler. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
(0 reviews)

















