KW

KW V2 INOX-LINE coilovers are the perfect solution for drivers who want more than just outstanding looks and adjustable ride height. In addition to stainless steel coilover struts, and corrosion-resistant components built for long term durability, KW V2 coilovers utilize TVR-A (Twin Valve Rebound – Adjustable) technology that allow Adjustment of the rebound damping characteristics with 16 clicks so you can fine tune the ride comfort or performance to your satisfaction. As with all KW coilovers our engineers develop vehicle specific damper settings that undergo comprehensive testing on the Nurburgring Nordschleife and in our KW 7-post Driving Dynamic Test Center. With a KW coilover kit the driving experience is more dynamic and direct. With the rebound adjustability you have a more direct influence on the handling or comfort of the car. With 16 precise clicks you can adjust the KW dampers (more firm or more comfortable) without affecting the compression damping fine-tuned by our engineers. The two-stage, patented TVR-A (Twin Valve Rebound – Adjustable) technology enables a small volume of oil flow through an adjustable, conically shaped, low-speed bypass during low damper speeds, while at high damper speeds, the main rebound stage valve opens allowing a larger volume of oil to flow. This provides a big improvement in terms of ride comfort without influencing the high-speed range. There are 16 precise clicks available for individual settings, so you can choose between more comfort or more body control. With KW V2 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar.

For over 20 years, KW automotive has been the market leader and driving innovation as a manufacturer of individual suspension solutions for the road and in all types of motorsports. No matter where in the world, gearheads, automobile manufacturers and reputable tuners rely on our KW coilovers “Made in Germany”. Every KW coilover kit undergoes extensive stress testing before production and is developed and manufactured exclusively in our company headquarters in Fichtenberg, a small in town in Germany, to meet the high standards of our KW quality management. For us as a German manufacturer, it goes without saying that our KW coil over kits will exceed the original equipment manufacturer quality and offer useful and innovative solutions. With an application list comprising more than 4,600 options KW guarantees an outstanding selection backed by our Limited Lifetime Warranty.

Is your factory sport suspension too firm? Do you want a sporty look and driving dynamics without having to compromise comfort? KW V2 comfort coilovers take the already stellar ride and reputation of KW suspensions coilover systems to the next level of comfort.Designed specifically to maximize comfort KW V2 Comfort coilovers provide a subtle lowering with adjustable ride height and rebound damping adjustability allowing the handling or the comfort to be individually tailored as desired via the integrated rebound adjustment knobs.KW V2 Comfort coilovers offer the perfect compromise of driving dynamics and ride comfort.With the KW V2 Comfort coilover kit, your comfort-oriented driving pleasure is the focus.That’s why our test engineers evaluate the setups on numerous highways and country roads with various road surface types.The KW V2 Comfort coilover kits are suitable for all drivers who want to combine the joy of a decent lowering with driving comfort.With the 16-click adjustable rebound damping (TVR-A-technology), you can tune the KW dampers on the KW V2 Comfort coilover kits to make it more comfortable or sportier.The two-stage, patented TVR-A (Twin Valve Rebound – Adjustable) technology enables a small volume of oil to flow through an adjustable, conically shaped, low-speed bypass during low damper speeds, while in the case of higher damper speeds, the main rebound stage valve opens allowing a larger volume of oil to flow.This provides a big improvement in terms of ride comfort without influencing the safety-relevant high-speed range.There are 16 precise clicks available for individual settings, so you can choose between more comfort or more body control.The KW V2 Comfort coilovers, made using INOX-LINE stainless steel technology, enables a vehicle-specific lowering within the tested adjustment range of 10 to 40 mm.

The KW V1 INOX-LINE coilover kit is our entry point into our street performance lineup. The high-quality INOX-LINE stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers the result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure. With KW V1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar. KW INOX-LINE coilover rewards the sporty driver with its harmonious pre-configured setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW develop the vehicle-specific KW damper tuning and spring rates with comprehensive testing on the Nurburgring Nordschleife and in the KW 7-post chassis dynamics test center. Unlike a mass produced, generic coilover kit, KW coilovers are developed specifically for your vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology that was all developed in-house. With the KW V1 coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving.

Cutting-edge motorsports technology for more performance on the road. Like every suspension product developed by KW automotive, the suspension manufacturer, and manufactured in Germany, the KW V3 Coilover suspension kit also provides a significant plus in safety reserves in road traffic. Thanks to the chassis with its high-quality dampers, springs, and elastomer spring elements, pitching and rolling movements during load changes such as evasive maneuvers, cornering, acceleration, and braking are significantly reduced. The braking distances are also shortened. Thanks to improved support and feedback, drivers not only feel safer but driving in everyday life becomes even safer. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your personal driving preferences or vehicle changes such as weight, tire characteristics, or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate, a scenario which results in reduced grip and the associated loss of performance. The KW V3 coilover kit is the ideal tool for performance-oriented drivers and experienced tuning enthusiasts who place a strong emphasis on the overall performance of their suspension. The Variant 3 features patented TVR-A and TVC-A technology that provides separately adjustable rebound and compression damping. The extensive adjustment range of the independently configurable rebound and compression make it easy to directly influence the steering behavior, directional stability, grip and handling characteristics for confident and repeatable results at the limit of driving dynamics.

Is your factory sport suspension too firm? Do you want a sporty look and driving dynamics without having to compromise comfort? KW V2 comfort coilovers take the already stellar ride and reputation of KW suspensions coilover systems to the next level of comfort.Designed specifically to maximize comfort KW V2 Comfort coilovers provide a subtle lowering with adjustable ride height and rebound damping adjustability allowing the handling or the comfort to be individually tailored as desired via the integrated rebound adjustment knobs.KW V2 Comfort coilovers offer the perfect compromise of driving dynamics and ride comfort.With the KW V2 Comfort coilover kit, your comfort-oriented driving pleasure is the focus.That’s why our test engineers evaluate the setups on numerous highways and country roads with various road surface types.The KW V2 Comfort coilover kits are suitable for all drivers who want to combine the joy of a decent lowering with driving comfort.With the 16-click adjustable rebound damping (TVR-A-technology), you can tune the KW dampers on the KW V2 Comfort coilover kits to make it more comfortable or sportier.The two-stage, patented TVR-A (Twin Valve Rebound – Adjustable) technology enables a small volume of oil to flow through an adjustable, conically shaped, low-speed bypass during low damper speeds, while in the case of higher damper speeds, the main rebound stage valve opens allowing a larger volume of oil to flow.This provides a big improvement in terms of ride comfort without influencing the safety-relevant high-speed range.There are 16 precise clicks available for individual settings, so you can choose between more comfort or more body control.The KW V2 Comfort coilovers, made using INOX-LINE stainless steel technology, enables a vehicle-specific lowering within the tested adjustment range of 10 to 40 mm.