Diode Dynamics

FeaturesBolt-on fitment compatible with Toyota 4Runner 2010-2024.Allows you to mount two Stage Series LED Pods above the hood.Utilizes existing mounting points and hardware for a simple installation.Thick-gauge stainless steel construction.Low-profile design. OverviewPerfect fitment. The Stage Series Backlit Ditch Light Kit compatible with Toyota 4Runner 2010-2024 allows you to easily mount two SS3 or SSC2 Backlit Pods above the hood. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required! This kit features a low profile design while minimizing glare and will not interfere with raising or lowering the hood.Backlight Functionality. Both the SS3 and SSC2 pods included in our Stage Series Ditch Light Kits feature a brilliant Amber backlight. This integrated backlight gives you an additional accent light along with the main beam. The backlight fully illuminates the TIR optic providing a more unique and modern look than the small indicator LEDs found in other products. To power the backlight use the included harness to tap your desired vehicle function.Built to last. The brackets in this kit are constructed out of thick-gauge stainless steel. Unlike other options made out of mild steel these brackets are full stainless steel and won’t corrode over time. With their thick-gauge construction you also won’t experience any vibration or bouncing while driving.Focused. Optics like reflectors or simple lenses lose light internally and to glare. However the custom-engineered TIR optic in the SS3 and SSC2 collects all of the light from the LED and directs it only where you need it drastically reducing glare and improving total efficiency.

FeaturesBolt-on fitment compatible with Toyota 4Runner 2010-2024.Allows you to mount two Stage Series LED Pods above the hood.Utilizes existing mounting points and hardware for a simple installation.Thick-gauge stainless steel construction.Low-profile design. OverviewPerfect fitment. The Stage Series LED Ditch Light Kit compatible with the Toyota 4Runner 2010-2024 allows you to easily mount two SS3 or SSC2 Pods above the hood. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required! This kit features a low profile design while minimizing glare and will not interfere with raising or lowering the hood.Built to last. The brackets in this kit are constructed out of thick-gauge stainless steel. Unlike other options made out of mild steel these brackets are full stainless steel and won’t corrode over time. With their thick-gauge construction you also won’t experience any vibration or bouncing while driving.Focused. Traditional optics like reflectors or simple lenses lose light internally and to glare so not all of the light shines on target. Instead the custom-engineered TIR optic in the SS3 and SSC2 collects all of the light from the LED and directs it only where you need it drastically reducing glare and improving total efficiency.Proven Reliability. Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F along with vibration moisture intrusion and corrosion testing. All of these tests are completed to SAE standards just like factory components. They’ve also been put to the test on-road by racers and enthusiasts alike.

FeaturesYellow replacement lens for SS3 LED PodMade out of durable polycarbonate with preinstalled o-ring sealAdvanced TIR optics provide high efficiency and focusAvailable in Driving SAE Fog Flood Combo or Spot beam patternsOverviewThis yellow lens is a direct replacement for the original main lens in your SS3 LED Pod. It can be used to change both the color and output pattern with a quick swap! Made of durable optical-grade polycarbonate each lens comes with an integrated o-ring to maintain a watertight seal.Easy Swap. Changing the main lens in the SS3 takes just a few seconds! Remove the four torx-head screws from the back frame pull the old lens and o-ring assembly out and put in your new lens which comes with the o-ring preinstalled. Take care not to touch the inner optical surface of your new lens during the swap or wear a pair of gloves to keep things clean. The locating pins ensure correct alignment and rotation. Reinstall the four screws so they are very hand-tight and you are ready to shine in your new color or beam pattern!Experience. After over a decade in business Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States allowing for higher quality and performance with the newest and brightest LED technology. No matter what you’re driving we pride ourselves in offering only the best possible LED solutions. Please contact us if you’d like to discuss your lighting project!

FeaturesModern TIR optics for the highest intensity on the marketDistinctive backlight featureDurable powdercoated aluminum constructionIntegrated Deutsch-style connectorPin-fin heatsink designDesigned torture tested and assembled in USAOverviewIntroducing the C2 1.0 LED Pod! Featuring higher output intensity than any other 2in light on the market these LED pods have been designed for maximum functionality with custom-engineered TIR optics shining in highly useful beam patterns all in a durable package.Focused. Traditional optics like reflectors or simple lenses lose light internally and to glare so not all of the light shines on target. Instead the custom-engineered TIR optic in the C2 1.0 collects all of the light from the LED and directs it only where you need it drastically reducing glare and improving total efficiency.Simple connections. All C2 1.0 LED pods feature a custom-molded DT type Deutsch-style connector on the back and come with a 6-inch pigtail with bare leads.Backlight Functionality The C2 1.0 LED Pod includes a distinctive backlight feature as well. The C2 1.0’s backlight fully illuminates the TIR optic providing a more unique and modern look than the small indicator LEDs found in other products.Proven Reliability. Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F along with vibration moisture intrusion and corrosion testing. All of these tests are completed to SAE standards just like factory components. They’ve also been put to the test on-road by racers and enthusiasts alike.

FeaturesModern TIR optics for the highest intensity on the marketDistinctive backlight featureDurable powdercoated aluminum constructionIntegrated Deutsch-style connectorPin-fin heatsink designDesigned torture tested and assembled in USAOverviewIntroducing the C2 1.0 LED Pod! Featuring higher output intensity than any other 2in light on the market these LED pods have been designed for maximum functionality with custom-engineered TIR optics shining in highly useful beam patterns all in a durable package.Focused. Traditional optics like reflectors or simple lenses lose light internally and to glare so not all of the light shines on target. Instead the custom-engineered TIR optic in the C2 1.0 collects all of the light from the LED and directs it only where you need it drastically reducing glare and improving total efficiency.Simple connections. All C2 1.0 LED pods feature a custom-molded DT type Deutsch-style connector on the back and come with a 6-inch pigtail with bare leads.Backlight Functionality The C2 1.0 LED Pod includes a distinctive backlight feature as well. The C2 1.0’s backlight fully illuminates the TIR optic providing a more unique and modern look than the small indicator LEDs found in other products.Proven Reliability. Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F along with vibration moisture intrusion and corrosion testing. All of these tests are completed to SAE standards just like factory components. They’ve also been put to the test on-road by racers and enthusiasts alike.

FeaturesBolt-on fitment compatible with Silverado/Sierra 1500 2014-2019.Allows you to mount two Stage Series LED Pods above the hood.Utilizes existing mounting points and hardware for a simple installation.Thick-gauge stainless steel construction.Low-profile design.OverviewPerfect fitment. The Stage Series Backlit Ditch Light Kit compatible with Silverado/Sierra 1500 2014-2019 allows you to easily mount two SS3 or SSC2 Backlit Pods above the hood. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required! This kit features a low profile design while minimizing glare and will not interfere with raising or lowering the hood.Backlight Functionality. Both the SS3 and SSC2 pods included in our Stage Series Ditch Light Kits feature a brilliant Amber backlight. This integrated backlight gives you an additional accent light along with the main beam. The backlight fully illuminates the TIR optic providing a more unique and modern look than the small indicator LEDs found in other products. To power the backlight use the included harness to tap your desired vehicle function.Built to last. The brackets in this kit are constructed out of thick-gauge stainless steel. Unlike other options made out of mild steel these brackets are full stainless steel and won’t corrode over time. With their thick-gauge construction you also won’t experience any vibration or bouncing while driving.Focused. Optics like reflectors or simple lenses lose light internally and to glare. However the custom-engineered TIR optic in the SS3 and SSC2 collects all of the light from the LED and directs it only where you need it reducing glare and improving efficiency.