Autometer Marine Silver Ultra-Lite 2-1/16in 0 Down 90 Up Electric Trim Level Gauge

Code: atm200766-33
Autometer Marine Silver Ultra-Lite 2-1/16in 0 Down 90 Up Electric Trim Level Gauge

Autometer Marine Silver Ultra-Lite 2-1/16in 0 Down 90 Up Electric Trim Level Gauge

$63.02

Out of stock

BRAND
CATEGORY
MPN
SKU
SUBCATEGORY
UPC
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

The” attitude” of a boat in the water can be controlled to a large extent by” trimming” the outdrive/propeller unit in relation to the stern of the boat. As the drive is trimmed up,the prop exerts more force downward,causing the bow to lift out of the water. As the drive is trimmed down,the force is exerted more in line with the boat hull,resulting in the bow riding lower in the water. Depending on a given trim angle,you can see increased or decreased speed,fuel economy,comfort and control at a given prop RPM. The trim gauge connects to a resistance based sender in the pivot of the outdrive. This functions much like the sender in a gas tank,with the gauge measuring resistance of the sender from totally down/in to totally up/out. This allows the operator to adjust for conditions and load quickly and easily.

Additional information

Weight 0.5 lbs
Dimensions 4.75 × 4.5 × 4.25 in

Reviews

There are no reviews yet.

Be the first to review “Autometer Marine Silver Ultra-Lite 2-1/16in 0 Down 90 Up Electric Trim Level Gauge”

Your email address will not be published. Required fields are marked *


Related products

  • Sale! AEM CD-5 Carbon Digital Dash Display
    Gauges

    AEM CD-5 Carbon Digital Dash Display

    The CD-5 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and/or 3rd-party CAN signals. We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port and the CD-5 Carbon can be added to any vehicle with the addition of our 22 Channel CAN Sensor Module. The CD-5 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go! All channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screen dashboard monitor or warning alerts.

    (0 reviews)
    Original price was: $1,423.35.Current price is: $1,264.95. Add to cart
  • Sale! AEM CD-7 Non Logging Race Dash Carbon Fiber Digital Display (CAN Input Only)
    Gauges

    AEM CD-7 Non Logging Race Dash Carbon Fiber Digital Display (CAN Input Only)

    Add a Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)

    (0 reviews)
    Original price was: $2,042.65.Current price is: $1,814.95. Add to cart
  • Sale! AEM 3.5 BAR MAP or 50 PSIA Brass Sensor Kit & Flying Lead
    Gauges

    AEM 3.5 BAR MAP or 50 PSIA Brass Sensor Kit & Flying Lead

    There are many different tools that can be used for measurement, but the degree of accuracy is dependent upon the tool. For example, a ruler can measure distance with a good degree of accuracy, but for a more precise measurement a caliper should be used. The difference between a brass pressure sensor and a stainless steel pressure sensor is similar if we think about it in these terms:

    (0 reviews)
    Original price was: $69.80.Current price is: $62.32. Add to cart
  • Sale! AEM CD-5L Carbon Logging Flush Digital Dash Display
    Gauges

    AEM CD-5L Carbon Logging Flush Digital Dash Display

    Flat Panel Digital Dash Display, CD-5L logging, non-GPS racing dash, CAN input only, 5-inch diagonal screen, carbon fiber enclosure, wiring harness included, Does Not Include Buttons (See PN 30-3610)

    (0 reviews)
    Original price was: $1,795.15.Current price is: $1,594.95. More Info