These replacement temperature sensors and included 3/8″ and 1/2″ adapters are designed for use with AutoMeter gauges produced prior to 1995 which are visually identifed by their light blue case and a distinctive black mask on the lens covering the pointer hubs. For current generation instruments, please see models #2258, #2259, and #2252.
| Weight | 0.2 lbs |
|---|---|
| Dimensions | 6.5 × 3.8 × 1 in |
Digital Boost Gauge, -30 – 50psi, incl blk and wht faces, blk and silvr bezels
There are many different tools that can be used for measurement, but the degree of accuracy is dependent upon the tool. For example, a ruler can measure distance with a good degree of accuracy, but for a more precise measurement a caliper should be used. The difference between a brass pressure sensor and a stainless steel pressure sensor is similar if we think about it in these terms:
The OBDII output simulates an auxiliary ECU signal when plugged into a vehicle’s OBD port, which requires a unique address from the other ECUs already on a vehicle’s network. AEM’s default OBDII CAN address will work with most popular vehicles and adjustments should not be necessary. However, AEM has provided OBDII address programmability through the buttons on the gauge face if a different address other than the default address is required, allowing users to program ECU #, Parameter Identification (PID), Message Identifier, and Bit Rate.
There are many different tools that can be used for measurement, but the degree of accuracy is dependent upon the tool. For example, a ruler can measure distance with a good degree of accuracy, but for a more precise measurement a caliper should be used. The difference between a brass pressure sensor and a stainless steel pressure sensor is similar if we think about it in these terms:
Reviews
There are no reviews yet.